Canon LV-S4 - Manual (Page 43)

43
The PIN code can be changed to your desired four-digit
number.
Select "PIN code change" with the Point d
d button, and press
the OK button. The New PIN code input dialog box will appear.
Select a number with the Point 7 8 buttons and fix the number
with the OK button. Repeat it to complete entering a four-digit
number. When the four-digit number is fixed, the pointer will
automatically move to "Set". Then press the OK button.
Be sure to note the new PIN code and keep it at hand.
To Change the PIN code
Change the PIN code
The input numbers
are being displayed
for confirmation.
Select Off, On1, or On2 with the Point 7 8 buttons and then
"Quit" with the Point d d button and press the OK button to close
the dialog box.
To Change the PIN code lock setting
Change the PIN code lock setting
Setting
Setting
PIN code lock
When the projector is
locked with the PIN
code, the PIN code
lock mark appears on
the menu bar.
PIN code lock
This function prevents the projector from being operated by an
unauthorized person and provides the following settings for
security options.
Off...............the projector is not locked with the PIN code.
On1 .............require to enter the PIN code every time turning on
the projector.
On2 ..........require to enter the PIN code to operate the
projector once the power cord is disconnected; as
long as the AC power cord is connected, the
projector can be operated without the PIN code.
Whenever to change the PIN code lock setting or the PIN code
(the four-digit number), you are required to enter the PIN code.
"1234" is set as the initial PIN code at the factory.
Enter a PIN code
Quit
Pointer
The input numbers
change to “
✳” for
security.
When the pointer
automatically move
to "Set", press the
OK button.
Enter a PIN code
Select a number by pressing the Point 7 8 buttons and fix the
number with the OK button. The number will change to "
✳". If
you fixed an incorrect number, move the pointer to "Set" or
"Clear" once by pressing the Point d
d button, then return to "PIN
code". Enter the correct number again.
Repeat this step to complete entering a four-digit number.
When the four-digit number is fixed, the pointer will
automatically move to "Set". Press the OK button so that you
can change the following PIN code lock settings.
If you entered an incorrect PIN code, "PIN code" and the
number (
✳✳✳✳) will turn red and disappear. Enter a correct
PIN code all over again.
Select PIN code
change and press
the OK button. The
New PIN code input
dialog box will
appear.
Select a desired
setting with the
Point 7 8 buttons.
✔
Note:
• If you forget your PIN code and unable to change it, the PIN code can be reset to
the factory default setting (1234) according to the following procedures.
When you reset the PIN code, the Logo PIN code and Key lock will be reset, as well.
1. Disconnect the AC Power Cord from the AC outlet.
2. As pressing the OK button on the projector, connect the AC Power Cord into an
AC outlet again. Keep pressing the OK button until the POWER indicator emits.
The PIN code will be returned to the factory default setting while the PIN code lock
state will remain the same as previous set state.