Canon LV-S4 - Manual (Page 22)

Press the NO SHOW button on the remote control unit to black
out the image. To restore to normal, press the NO SHOW button
again or press any other button. When a projected image is
captured and set as “User” in the Logo item in the Setting Menu
(p40), the screen changes each time you press the NO SHOW
button as follows.
The message disappears after 4 seconds.
black out ➜ the captured image ➜ normal ➜
• • • • •
No Show Function
22
Basic Operation
Press the FREEZE button on the remote control unit to freeze the
picture on the screen. To cancel freezing, press the FREEZE
button again.
Picture Freeze Function
Keystone Adjustment
1 Press KEYSTONE button on the remote control unit or select
Keystone on the Setting menu (p38) to display the Keystone
dialog box.
2 Correct keystone distortion by pressing Point ed buttons.
Press Point e button to reduce the upper part of image, and
press Point d button to reduce the lower part.
Reduce the upper width with Point e button. Reduce the lower width with Point d button.
If a projected picture has keystone distortion, correct the image with the keystone adjustment.
– Arrows are blue in no correction.
– The arrow of direction being corrected turns
light blue.
– The arrow disappears at the maximum
correction.
– If you press the KEYSTONE on the remote
control unit once more while the keystone
dialog box is being displayed, the adjustment
will be canceled.
P-TIMER FREEZE
COMPUTER VIDEO
INPUT
D.ZOOM
MUTE MUTE
VOL- MENU
NO SHOW SHOW IMAGE IMAGE
VOL+
KEYSTONE
AUTO PC
POWER
Remote Control Unit
NO SHOW
button
FREEZE
button
KEY STONE
button