Cabletron Systems SPECTRUM FRX6000 - Manual (Page 25)

Using the Hub View 2-9
Using the FRX4000, FRX6000, and SmartSwitch 1800 Hub View
Clicking the Device button displays the Device menu, Figure 2-4 .
Figure 2-4. Hub View Device Menu
The Device menu lets you perform the following:
¥ Open the Device Information window (described in Viewing Device
Information
, page 2-16 ).
¥ Open the Polling Intervals window (described beginning on page 2-32 ).
¥ Select a Port Display Form (described beginning on page 2-12 ).
¥ Launch the generic MIB I, II application (described in the SPMA Tools Guide).
¥ Open the Trap Table window (described in Chapter 3, ConÞguring the Trap
Table
).
¥ Open the Subscriber Table window (described in Chapter 4, ConÞguring the
Subscriber Table
).