Cabletron Systems SPECTRUM FRX6000 - Manual (Page 204)

Bridge Configuration
11-10 Configuring Bridge Ports
To delete an existing entry:
1. In the list box, click to select the LAN Interface you wish to delete. The
selected entry will be highlighted. (Note that you can only delete one entry at
a time.)
2. Click on to delete the selected entry.
NOTE
After you have made system-level changes (such as conÞguring a Bridge Interface), you
must apply those changes by rebooting the FRX or SmartSwitch 1800 device, or through
console management via the [F7] command.