Cabletron Systems SPECTRUM FRX6000 - Manual (Page 194)

IPX Interface Configuration
10-14 Configuring IPX Static Routes
Adding or Modifying IPX Static Routes
First, access the IPX Static Route ConÞguration window (see IPX Static Route
ConÞguration , page 10-12 ).
To add a new IPX Static Route:
1. Enter the Circuit Index, the Network Number, and the Router Address for
each route.
2. Click on to add your new entry.
To modify an existing entry:
1. In the list box, click to select the static route you wish to modify. The selected
entry will be highlighted. (Note that you can only modify one entry at a time.)
2. Edit the fields, as desired. If you would like to return to the original values,
click on the Refresh button.
3. Click on to modify the selected entry.
To delete an existing entry:
1. In the list box, click to select the static route you wish to delete. The selected
entry will be highlighted. (Note that you can only delete one entry at a time.)
2. Click on to delete the selected entry.
NOTE
After you have made system-level changes (such as conÞguring an IPX Interface), you
must apply those changes by rebooting the FRX or SmartSwitch 1800 device, or through
console management via the [F7] command.