Bryant evolution thermostat - Manual (Page 7)

QUICK GUIDE INSTRUCTIONS 3
2 Press the ZONE button until the name of the zone you wish
to control appears on the upper left screen. Selecting “ALL
ZONES” allows you to select one temperature for the entire
home. Press the ZONE button for three seconds to activate
the “ALL ZONES” feature.
3 Use the Right Up/Down button to select your desired tempera-
ture, which will be displayed on the lower right. An override time
will be displayed on the lower left. Please note an override time
will not appear if programming has been turned off.
4 You can change the override time in 15-minute increments by
pressing the Left Up/Down button until the desired override
time is selected.
- OR -
Press the HOLD button to override the schedule indefinitely.
Adjust Cooling Temperature
1 Press the blue COOL button. Cooling is confirmed when
the blue LED adjacent to the blue button is lit.
2 Press the ZONE button until the name of the zone you wish
to control appears on the upper left screen. Selecting “ALL
ZONES” allows you to select one temperature for the entire
home. Press the ZONE button for three seconds to activate
the “ALL ZONES” feature.
3 Use the Right Up/Down button to select your desired
temperature, which will be displayed on the lower right. An
override time will be displayed on the lower left. Please
note an override time will not appear if programming has
been turned off.