Advanced setup 32 – Bryant evolution thermostat User Manual
Page 36

ADVANCED SETUP
32
NOTE: You can exit Advanced Setup at any time. When exiting, you
will be prompted to save changes if you have made any. Select
“YES” to save your changes, “NO” to revert back to
previous settings.
Cooling Humidity
1
Open the door of the Evolution
®
Control.
2
Press the ADVANCED setup button.
3
Press the LEFT button three times to view the COOLING
HUMIDITY screen (4 of 7).
4
Use the Right Up/Down button to set your desired humidity level.
5
To exit, press ADVANCED or simply close the door.
- OR -
6
If you want to change the way cooling dehumidification is
controlled, scroll to DEHUMIDIFY. You will have two options.
OFF – The system will not activate the cooling equipment to
dehumidify if the cooling temperature has been satisfied.
ON – The system dehumidifies by activating the cooling
equipment – even after the cooling temperature has been
satisfied. The system will not cool to dehumidify below 70° F
in order to protect equipment. Your air conditioning system will
provide excellent humidification control with DEHUMIDIFY set to
either ON or OFF
. However, you will receive better humidification
control with the ON setting.
7
Use the Right Up/Down button to make your selection.
8
To exit, press ADVANCED or simply close the door.
NOTE: You can exit Advanced Setup at any time. When exiting,
you will be prompted to save changes if you have made any.
Select “YES” to save your changes, “NO” to revert back to
previous settings.