Bryant evolution thermostat - Manual (Page 18)

NORMAL OPERATION 14
1 Press the LEFT button to show the status of:
- Air filter (FILTER)
- Humidifier pad (HUM. PAD)
- UV Lamps
2 Press the RIGHT button to exit.
Resetting Accessory Usage Indicator
After an air filter, humidifier pad, or UV Lamp has been replaced
or cleaned, you may need to manually reset the percent used
indicator for the respective accessory.
1 Press the LEFT button to access the ACCESSORY STATUS
screen.
2 Use the SCROLL button to highlight the accessory you wish
to reset.
3 Press the RIGHT button to reset the selected accessory.
4 Press the LEFT button to exit.
- OR -
5 Continue to reset accessory usage indicators as desired.
Accessory Maintenance Pop-Up Messages
Accessory Pop-Up messages remind you when it’s time
for accessory maintenance. There can be up to five messages,
depending on the accessories installed with your system:
- Replace UV Lamps
- Change Humidifier Pad
- Clean Air Filter - EAC
- Clean or Replace Air Filter
- Clean Ventilator Filter