Normal operation 10 – Bryant evolution thermostat User Manual

Page 14

NORMAL OPERATION

Use the Right Up/Down button to select your desired tempera-

ture, which will be displayed on the lower right. An override

time will be displayed on the lower left. Please note an over-

ride time will not appear if programming has been turned off.

You can change the override time in 15-minute increments by

pressing the Left Up/Down button until the desired override

time is selected.

- OR -

Press the HOLD button to override the schedule indefinitely.

Adjust Cooling Temperature

Press the blue COOL button. Cooling is confirmed when the

blue LED adjacent to the blue COOL button is lit.

2 Press the ZONE button until the name of the zone you wish

control appears on the upper left screen. Selecting “ALL

ZONES” allows you to select one temperature for the entire

home. Press the ZONE

button for three seconds to activate

the “ALL ZONES” feature.

Use the Right Up/Down button to select your desired temper-

ature, which will be displayed on the lower right. An override

time will be displayed on the lower left. Please note an over-

ride time will not appear if programming has been turned off.

You can change the override time in 15-minute increments

by pressing the Left Up/Down button until the desired over-

ride time is selected.

- OR -

Press the HOLD button to override the schedule indefinitely.