Bryant evolution thermostat - Manual (Page 6)

QUICK GUIDE INSTRUCTIONS 2
This guide provides the basic operations for setting up and
operating your Evolution ® Control.
Set Day, Time & Desired Humidity
1 Open the door of the Evolution
®
Control.
2 Press the BASIC button.
3 Adjust the highlighted HOUR setting
using the Left Up/Down button.
4 Press SCROLL to highlight MINUTE.
5 Adjust the MINUTE setting using the Left
Up/Down button.
6 Press SCROLL to highlight DAY.
7 Adjust the current DAY setting, using the Left Up/Down
button, until the correct day is displayed.
8 Press SCROLL to highlight HUMIDITY.
9 Press the red HEAT button to set the heating humidity.
10 Adjust the desired heating humidity using either Up/Down
button.
11 Press the blue COOL button to set the cooling humidity.
12 Adjust the desired cooling humidity using either Up/Down
button.
13 Press BASIC or close the door to exit.
Adjust Heating Temperature
1 Press the red HEAT button. Heating is confirmed when the
red LED adjacent to the red HEAT button is lit.