Bryant evolution thermostat - Manual (Page 25)

9 Set the cooling temperature using the Right Up/Down button.
10 Use the SCROLL button to highlight the next period, then repeat
steps 5 – 9 to select settings for DAY, EVENING and SLEEP .
11 Exit by pressing the SCHEDULE button or closing the door.
- OR -
12 To create a WEEKDAYS schedule for the remaining zones, press
the ZONE button to select the next zone you wish to program.
Then, repeat steps 4 – 10 in this section.
- OR –
13 Begin entering your WEEKEND schedule by pressing the RIGHT
button and following the Weekend Schedule instructions (the
next section in this manual).
Weekend Schedule
You can program an identical schedule for Saturday and Sunday
using the WEEKEND screen.
1 Open the door of the control.
2 Press the SCHEDULE button to access the schedule screen.
3 Select the zone you want to program by pressing the ZONE
button until the correct zone name appears on the upper left
screen. Selecting “ALL ZONES” allows you to create one
WEEKEND schedule for the entire home.
4 If the word “WEEKEND” appears at the top of the screen, you
are ready to start. If not, press either the LEFT or RIGHT button
as necessary until WEEKEND is displayed. The WAKE time
period will be highlighted.
5 Using the Left Up/Down button, set the start time for this period.
6 Press the red HEAT button. Heating temperature will begin
flashing.
PROGRAMMABLE FEATURES, 21
SETUP & OPERATION