Bryant evolution thermostat - Manual (Page 15)

NORMAL OPERATION 11
Adjust Fan Speed
The Evolution
®
Control offers the benefit of customized fan speeds
during continuous fan operation. Fan speeds can be individually
selected for each zone as well.
1 Press the ZONE button until the name of the zone you wish
to control appears on the upper left screen. Selecting “ALL
ZONES” allows you to change fan speed for the entire home.
Press the ZONE button for three seconds to activate the
“ALL ZONES” feature.
2 Press the FAN button to adjust the fan speed between LOW,
MEDIUM, HIGH or AUTO airflow. OFF is also a selection
when the system has been turned off at the Evolution Control.
Your fan speed selection will only apply to the displayed zone.
Hold Current Temperature
Press the HOLD button to override the program and maintain the
current indoor temperature set point(s) indefinitely.
To revert back to your programmed comfort schedule, press the
HOLD button again.
NOTE: HOLD is not available if programming has been turned off.
Also, if you switch from HOLD to either VACATION or UNOCCUPIED, the
system will revert back to HOLD when those functions are cancelled.
Unoccupied Function & Settings
UNOCCUPIED allows you to instantly set the system for energy
saving operation.
1 To select UNOCCUPIED operation, press the HOLD button
for three seconds. UNOCCUPIED text will be displayed.