Bryant evolution thermostat User Manual

Page 31

ZONING FEATURES, SETUP & OPERATION

ZONE FEATURES, SETUP & OPERATION

Each zone in your home has a separate sensor to help monitor

that zone’s conditions. The Evolution

Control is your main interface

for setting and changing each zone’s comfort schedule.

Checking Zone Status

The zone status may be observed from optional Smart Sensors

or the Evolution Control. To check zone status from the Evolution

Control, press the ZONE button on the upper left side of the

control until the zone you want to check appears.

Naming Your Zones

Each zone can be given a distinct name by the homeowner.

Details on customizing zone names can be found in the

ADVANCED SETUP section, page 35.

Programming Each Zone

Zones can be programmed the same way or individually. Details

for programming zones are outlined in the PROGRAMMABLE

FEATURES, SETUP & OPERATION section of this manual,

pages 17-26.

Unoccupied Function

Pressing and holding the Hold button for 3 seconds will set a zone

to be Unoccupied. This will load set back temperature settings

for the zone and help control temperature in other zones more

accurately. It is advisable to set unused zones to Unoccupied.