Bryant evolution thermostat - Manual (Page 11)

NORMAL OPERATION 7
NOTE: You can exit at any time. When exiting, you will be
prompted to save changes if you have made any. Select “YES”
to save your changes, “NO” to revert back to previous settings.
Turn System On/Off
The OFF button is used to turn the system both on and off.
Heating
To select heating, press the red HEAT button.
Heating is confirmed when the red LED
adjacent to the red HEAT button is lit. Heating
is operating when the red LED is gradually
pulsing on and off. (The LEDs can be turned
off. For details, see ADVANCED SETUP –
DISPLAY on page 30.) The heating tempera-
ture will appear in the lower right screen with the text, “HEAT AT.”
Auxiliary Heat
Auxiliary heat is staged electric heating included with many heat
pump systems. Auxiliary heat is automatically activated by the
system when it’s too cold for the heat pump to effectively heat
your home. Auxiliary heat operation is confirmed when the red
LED adjacent to the red HEAT button is lit, gradually pulsing on,
then off. (The LEDs can be turned off. For details, see ADVANCED
SETUP – DISPLAY on page 30.) The text, “AUXILIARY HEAT ACTIVE”
will appear below the room temperature.