Configuring ip qos policies, Setting an ip qos policy, Specifying precedence for an ip qos policy – Cabletron Systems SmartSwitch Router 9032578-02 User Manual
Page 182: Configuring ipx qos policies
Chapter 11: QoS Configuration Guide
182
SmartSwitch Router User Reference Manual
•
Layer-3 source-destination flows
•
Layer-4 source-destination flows
•
Layer-4 application flows
Configuring IP QoS Policies
To configure an IP QoS policy, perform the following tasks:
1.
Identify the Layer-3 or 4 flow and set the IP QoS policy.
2.
Specify the precedence for the fields within an IP flow.
Setting an IP QoS Policy
To set a QoS policy on an IP traffic flow, enter the following command in Configure mode:
Specifying Precedence for an IP QoS Policy
To specify the precedence for an IP QoS policy, enter the following command in Configure
mode:
Configuring IPX QoS Policies
To configure an IPX QoS policy, perform the following tasks:
1.
Identify the Layer-3 or 4 flow and set the IPX QoS policy.
2.
Specify the precedence for the fields within an IPX flow.
Set an IP QoS policy
qos set ip
|any
|any
|any
|any
|any
|any
Specify precedence for an
IP QoS policy.
qos precedence ip [sip
] [dip
]
[srcport
] [destport
]
[tos
] [protocol
] [intf
]