Cabletron Systems SmartSwitch Router 9032578-02 - Manual (Page 163)

SmartSwitch Router User Reference Manual 163
Chapter 10: Security Configuration Guide
To configure TACACS security, enter the following commands in the Configure mode:
Monitor TACACS
You can monitor TACACS configuration and statistics within the SSR.
To monitor TACACS, enter the following commands in Enable mode:
Configure TACACS Plus
You can secure login or Enable mode access to the SSR by enabling a TACACS Plus client.
A TACACS Plus server responds to the SSR TACACS Plus client to provide
authentication.
You can configure up to five TACACS Plus server targets on the SSR. A timeout is set to
tell the SSR how long to wait for a response from TACACS Plus servers.
To configure TACACS Plus security, enter the following commands in Configure mode:
Monitor TACACS Plus
You can monitor TACACS Plus configuration and statistics within the SSR.
Specify a TACACS server. tacacs set host
Set the TACACS time to wait for a
TACACS server reply. tacacs set timeout
Determine SSR action if no server
responds. tacacs set last-resort password|succeed
Enable TACACS. tacacs enable
Show TACACS server statistics. tacacs show stats
Show all TACACS parameters. tacacs show all
Specify a TACACS Plus server. tacacs-plus set host
Set the TACACS Plus time to wait
for a TACACS Plus server reply. tacacs-plus set timeout
Determine the SSR action if no
server responds. tacacs-plus set last-resort
password|succeed
Enable TACACS Plus. tacacs-plus enable