Poulan 184877 User Manual
Poulan, File copy, Owner's manual
Table of contents
Document Outline
- A
- A
- TRAINING
- PREPARATION
- OPERATION
- MAINTENANCE AND STORAGE
- - IMPORTANT -
- CUSTOiVlER RESPONSIBILITiES
- OPERATOR’S POSITION (See Fig. 1)
- UNPACKING CARTON (See Fig. 2)
- ATTACH CLUTCH CABLE (See Fig. 6)
- CONNECT SHIFT ROD (See Fig. 7)
- REMOVE TILLER FROM CRATE
- CHECKTIRE PRESSURE
- HANDLE HEIGHT
- READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TILLER.
- MEETS ANSI SAFETY REQUIREMENTS
- STOPPING (See Fig. 9)
- TINE OPERATION - WITH WHEEL DRIVE
- FORWARD-WHEELS ONLY/TINES STOPPED
- REVERSE-WHEELS ONLY/TINES STOPPED
- HARD TO SHIFT GEARS
- DEPTH STAKE (See Fig. 10)
- TILLING (See Fig. 11)
- TURNING
- OUTER SIDE SHIELDS (See Fig. 11)
- TO TRANSPORT
- CHECK ENGINE OIL LEVEL (See Fig. 12)
- ADD GASOLINE
- TO START ENGINE (See Fig. 13)
- TILLING HINTS
- TINE SHEAR PINS
- CULTIVATING
- ADJUST WHEELS FOR CULTIVATING (See Figs. 16 and 17)
- BEFORE EACH USE
- LUBRICATION
- LUBRICATION CHART
- LUBRICATION
- AIR FILTER (See Fig. 20)
- COOLING SYSTEM (See Fig. 21)
- MUFFLER
- SPARK PLUG
- TRANSMISSION
- TO ADJUST HANDLE HEIGHT (See Fig. 22)
- TIRE CARE
- TO REMOVE WHEEL (See Fig. 23)
- TINE REPLACEMENT (See Fsgs. 24, 25 and 26)
- TO REMOVE BELT GUARD (See Fig. 27)
- TO REPLACE GROUND DRIVE BELT (See Figs. 27 and 28)
- GROUND DRIVE BELT ADJUSTMENT (See Fig. 28)
- TO ADJUST THROTTLE CONTROL CABLE
- TROUBLESHOOTING POINTS