beautypg.com

Cooling system (see fig. 21), Muffler, Spark plug – Poulan 184877 User Manual

Page 14: Transmission, Maintenance, Cleaning

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

MAINTENANCE

COOLING SYSTEM (See Fig. 21)

c-'-^gine is air cooled. For proper engine performance

ong life keep your engine clean.

Clean air screen frequently using a stiff-bristled
brush.

Remove blower housing and clean as necessary.

Keep cylinder fins free of dirt and chaff.

MUFFLER

Do not operate tiller without muffler. Do not tamper with

exhaust system. Damaged mufflersorsparkarresters could

create a fire hazard. Inspect periodically and replace if

necessary. If your engine is equipped with a spark arrester
screen assembly, remove every 50 hours for cleaning and
inspection. Replace if damaged.

SPARK PLUG

Replace spark plugs at the beginning of each tilling sea­
son or after every 50 hours of use, whichever comes first.

Spark plug type and gap setting is shown in “PRODUCT
SPECIFICATIONS” on page 3 of this manual.

TRANSMISSION

Once a season, lubricate the right hand side gear case
grease fitting with oz. of EP #1 grease.

CLEANING

Do not clean your tiller when the engine and transmission

are hot. We do not recommend using pressurized water
(garden hose, etc.) to clean your unit unless the gasket
area around the transmission and the engine muffler, air

filter and carburetor are covered to keep water out. Water

in engine will shorten the useful life of your tiller.

Clean engine, wheels, finish, etc. of all foreign mat­

ter.

Keep finished surfaces and wheels free of all gasoline,

oil, etc.

Protect painted surfaces with automotive type wax.

14