To adjust handle height (see fig. 22), Tire care, To remove wheel (see fig. 23) – Poulan 184877 User Manual
Page 15: Service and adjustments
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SERVICE AND ADJUSTMENTS
A
CAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come into
contact with plug.
TILLER
TO ADJUST HANDLE HEIGHT (See Fig. 22)
Select handle height best suited for your tilling conditions.
Handle height will be different when tilier digs into soil.
•
First loosen handle lock lever.
•
Handle can be positioned at different settings between
“HIGH” and “LOW” positions.
•
Retighten handle lock lever securely after adjusting.
TIRE CARE
A
CAUTION: When mounting tires, un
less beads are seated, overinflation can
cause an explosion.
•
Maintain 20 PS! (1.4 kg/cm^) of tire pressure. If tire
pressures are not equal, tilier will puli to one side.
•
Keep tires free of gasoline or oil which can damage
rubber.
TO REMOVE WHEEL (See Fig. 23)
•
Place blocks under transmission to keep tilier from
tipping.
•
Remove hairpin clip and clevis pin from wheel.
•
Remove wheel and tire.
•
Repair tire and reassemble.
15