Service and adjustments, To adjust throttle control cable, See fig. 29) – Poulan PPRT5C User Manual
Page 18: To adjust carburetor, Engine
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SERVICE AND ADJUSTMENTS
ENGINE
TO ADJUST THROTTLE CONTROL CABLE
(See Fig. 29)
® Loosen cable clamp screw to allow cable to move.
» Move throttle control lever on upper handle to “FAST
position.
® Puli throttle cable out until engine belicrank is back as
far as it will go.
® Hold cable in this position and tighten clamp screw
securely. ,
TO ADJUST CARBURETOR
The carburetor has been preset at the factory and adjus
ment should not be necessary. However, minor adjus
ments may be required to compensate for differences ;
fuel, temperature, altitude or load. If the carburetor doe
need adjustment, see the engine manual packed with yoi
unit.
IMPORTANT: NEVER TAMPER WITH THE ENGIN
GOVERNOR, WHICH IS FACTORY SET FOR PROPE
ENGINE SPEED. OVERSPEEDING THEENGINE ABOV
THE FACTORY HIGH SPEED SETTING CAN B
DANGEROUS. IF YOUTHiNKTHE ENGINE-GOVERNE
HIGH SPEED NEEDS ADJUSTING, CONTACT YOU
NEAREST AUTHORIZED SERVICE CENTER, WHICH HA
THE PROPER EQUIPMENT AND EXPERIENCE TO MAK
ANY NECESSARY ADJUSTMENTS,
18