Parts list – Troy-Bilt 12204-10HP User Manual
Page 57
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

MODELS 12089, 12090, 12204
Parts List
REF
No.
PART
No.
DESCRIPTION
QTY.
1
1915087
Screw Kit, includes five (5)
1/4"-20
X
5/8“ seif-sealing
screws......................... As Req’d
2
20873
Cover-tiller housing.......... 1
3
1129-1
Gasket-tiller housing cover, .010". As
thick.....................................Req’d
3
1129-2 Gasket-same as above, .030“ As
thick.....................................Req'd
4
1901972
Shaft-tiller tine................... 1
5
97074
Ball Bearing............................ 2
6
1901976
Worm Gear-bronze, tiller tine
shaft..................................... 1
7
1104
Key-tiller tine shaft, woodruff key. 1
8
97073
Seal-oil, tiller tine shaft.... 2
TILLER DRIVE SHAFT ASSEMBLY ,
9
9500
Retaining Ring-external.... 2
10
1909138
Dog Clutch-tiller drive shaft.
1
11
9301
Key-3/16"xr'....................... 1
12
2127
Spring-dog clutch............. 1
13
1138-1
Shim-dog clutch, 1/16"(.62") thick.. 1
14
1915089
Screw Kit, includes three (3)
1/4"-20
X
7/8“ self-sealing
screws........................ As Req’d
15
1900881001 Cap-rear bearing.............. 1
16
1124-2
Gasket-rear bearing cap.....
1
REF
No.
PART
No.
17
17
17
17
18
19
20
21
1224-1
1224-2
1224-3
1224-4
1714
11602
9617
9517
DESCRIPTION
QTY.
Shim-front bearing cap, .010" As
thick.................................. Req'd
Shim-same as above, .030" As
thick..................................Req'd
Shim-same as above, .005" As
thick.................................. Req'd
Shim-same as above, .062" As
thick.................................. Req'd
Bearing & Cup-sold as set only.... 2
Shaft-main tiller drive (incl. an
integral worm gear, plus two
pressed-on cone roller bearings,
two bearing cups (Ref. IMo. 18) and
one shoulder washer........... 1
Seal-oil, drive shaft, front..... 1
Retaining Ring-internal.......... 1
TRANSMISSION HOUSING AND DIPSTICK
23
1902000
Housing-tiller attachment (incl.
pressed-on sleeve in front of
housing). Empty housing
without shafts, gears, seals,
dipstick, etc. Call Factory
before ordering...............
24
1909157
Dipstick-oil, tiller attachment....
57