Connecting a power supply, Connecting power supply leads, Connecting a power supply -13 – Asus P/I-AP55T User Manual
Page 81: Technical summary
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Technical Summary
Connecting A Power Supply
The system power supply connector is for a 5-volt power supply. To connect the
leads from the power supply, you should first make sure the power supply is
unplugged. Most power supplies have two leads. Each lead has six wires, two of
which are black. Orient the connectors so the black wires are in the middle.
Align the plastic guide pins on lead to their receptacles on the connector. You may
need to hold the lead at an angle to line it up. Once you have the guide pins
aligned, press the lead onto the connector so that the plastic clips on the lead
snap into place and secure the lead to the connector.
See the diagram on page 1-7 for the location of these connectors.
Connecting Power Supply Leads
The black wires should be in the middle.
4-13