Snow throwing patterns – Troy-Bilt 42000 User Manual

Page 21

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Section 4: Operation (continued)

Snow throwing patterns

Use the pattern shown in Fig. 4-12

when snow can only be thrown to one
side of the area being cleared.

Begin removing snow from the side

the snow cannot be thrown to. Direct the

discharge away from this side. When

turning the unit at the end of each pass,

rotate the discharge chute so it continues

to throw snow only to one side.

Use the pattern shown in Fig. 4-13

when throwing snow to both sides.

Change the direction of the discharge

chute only when turning at the end of
each pass.