Husqvarna 1030 BioClip - Manual (Page 5)

These symbols are on the machine and in the instructions.
Study them carefully so that you know what they mean.
Read the instructions.
R N
Reverse Neutral
© a i\i II
Fast Slow Engine off Battery
Oil pressure Cutting height Backwards
Use hearing protection Clutch in
Forwards
Choke Fuel
stop ! start
Ignition
1= I?
Hydrostatic freewheel
(©) o A
Clutch out Parking brake Brake Warning
Sound level Warning! Rotating blades Warning! Risk that the machine can tip over Never drive across a slope
European standard for
machine safety
O
O
Never use the machine if persons,
especially children, or animals,
are in the vicinity
Never carry passengers on the Keep hands and feet away
machine or equipment from under the hood when
the engine is running
Drive very slowly
without the cutting unit
Starting instructions
Read the instructions
Check the engine’s oil level
Check the hydrostat’s oil level
Lift up the cutting unit
Put the gear shift/hydrostat pedal in
neutral
Brake
If the engine is cold use the choke
Start the engine
Release the parking brake before
driving
1“7
Speed limiter pedal forwards
Neutral
Speed limiter pedal reverse
Switch off the engine and take off
the ignition cable before repairs or
maintenance
4
- English