Stopping the engine, Disengage iever, Stopping the engine disengage lever – Husqvarna 1030 BioClip User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
WARNfNQi
Never drive the machine on ground
at an angle of more than 15°. Mow
slopes upwards and downwards,
never across. Avoid sudden changes
in direction.
Stopping the engine
Preferably allow the engine to idle for a minute to
obtain normal working temperature before stopping
it if it has been working hard.
1. Lift up the cutting unit by pulling the lever back
to the locked position.
2. Move the throttle control to the MIN. position.
Turn the ignition key to the STOP.
Disengage iever
To move the machine when the engine is switched
off the disengage lever must be pulled backwards.
16 - English
This manual is related to the following products: