Checking and adjustment of the throttle wire, Checking and adjustment of throttle wire – Husqvarna 1030 BioClip User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Checking and adjustment of the throttle
wire
Check that the engine responds to the throttle
control and that the correct engine speed is
achieved at full throttle.
If necessary the following adjustment can be made;
1. Release the clamping screw and push the
throttle control to full throttle position.
2. Pull the throttle wire’s outer casing to the right
and tighten the clamping screw.
English
-29
This manual is related to the following products: