Driving the machine – Husqvarna 1030 BioClip User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
5. When the engine starts release the ignition key
immediately back to neutral position.
IMPORTANT INFORMATION
Do not run the starter for more than about
5 seconds at a time. If the engine does not
start, wait about 10 seconds before trying
again.
6. Push the choke lever gradually forward when the
engine has started.
7. Set the required engine speed with the throttle
control.
!
WARNING!
Never run the engine indoors, in en
closed or poorly ventilated areas. The
exhaust fumes contain toxic carbon
monoxide.
Driving the machine
1. Release the parking brake by pressing the brake
pedal.
2. Carefully press down one of the pedals until the
required speed is obtained.
To drive forward press down pedal (1), or to
reverse pedal (2).
14 - English