SINGER W1066 - Manual (Page 17)

1 7 . B U N D S T I T C H H E . M M I N G
(A) For Normal Materia!
1. Moving the special stitch control lever fully over to the left
against BS. (Fig. 19)
2. Moving the zigzag width knob at 'O’.
3. Loosen presser foot thumb screw and attach blind hem
guide. (Fig. 20)
4. Fold matarial as shown (Fig. 21) and place it under foot.
5. Sewing carefully so that straight stitches are made on hem
edge, and slantino stitches pierce only one or two threads of
fold. (Fig. 22)
Fig 20 c r. I Fig 21
(B) For Stretch Material
The same manner as above except the zigzag width knob must
be moved to between '1' and '2'.
. You may have to vary the setting according to the material.
-15-