Stretch stitch sewing – SINGER W1066 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
16. STRETCH STITCH SEWING
Adiusting your machine for stretch stitching, by moving special
stitch control lever to the right position until the lever is against
the SS. (Fig. 18)
*This machine is capable of producing stretch stitch on both
straight and zigzag seams.
(A) Straight Stretch Stitch
When
the
special
stitch
control
lever
is
in
the
position
as
described above and the stitch width knob is at ’o’. The stitch
length can be adjusted as desired according the thickness of
the material being sewn.
.
(Bi ZIGZAG STRETCH STITCH
The same manner as above except the zigzag width knob must
be moved to beyond
0
to any number.
Setting this control between '3' and '5' will probably give you
the best result. The stitch length dial can also be adjusted in
the same manner as described above for straight stretch sewing.
NOTE. FOR ALL NORMAL SEWING LEAVE THIS CONTROL AT
THE ’M' POSITION.
NEVER MOVE THIS CONTROL UNLESS THE NEEDLE IS
FULLY RAISED OUT OF THE MATERIAL BEING SEWN.
Fig 18
1 4
-