The set of hemmers, Hemmer set – SINGER W311 User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
THE SET OF HEMMERS
37
with hemmer inplace,
.-
't 4 t .
handwheel onefull
under hemmer. G rasp
and slip horizontal -
Bobbin threadwill
Before attaching any of the hemmers, be sure bob-
'
f
bin thread is pulled up. Then,
hold top thread loosely and turn
turn toward you, making
a
loop
bobbin thread with both hands
ly under hemmer toward back.
catch loop and carry upper thread to back of hem
mer.
Fold material to suit for two inches along edge,
hold at each end of fold. Slip fold into guide and
up over spoon (Fig. 71). Fold hem in material back of hemmer. Draw forward to end of hem
and fasten with point of needle. Pull on threads gently as you start stitching.
Fig. 71
HEMMER SET
You can make a hem
Y
a
" , Y ," o r Y "
in width, depending upon which
hemmer you use. For a few of the many uses see Figs. 72, 73, 74, 75, 76
and 77.