SINGER W217 User Manual
SINGER Sewing machines
Table of contents
Document Outline
- DiSCRIPTION OF MACHIN!
- REPLACING THE NEEDLE
- t
- he ,d,e,a, ,F. holddc. .heel .0^4,20.
- ::eG:.:rrr:rd:.i.. .h.n..di.ond 00™ „ .o
- TO REMOVE THE WORK
- TO REGULATE THE LENGTH OF STITCH
- REVERSE SEWING
- TO REGULATE THE STITCH FORMATION
- TO REGULATE THE NEEDLE TENSION
- TO REMOVE ACCUMULATED LINT OR CLEAN HOOK AND RACE
- NEEDLE POSITION LEVER
- dZË)
- TO SEW VARIOUS PATTERNS (OR USE OF ZIGZAG CAMS)
- TO CHANGE THE PRESSER FOOT
- то MAKE OVER LOCK STITCH
- TO TURN A CORNER
- TO BLINDSTITCH
- TO HEM (HEMMER FOOT)
- TO MAKE A FILLED SEAM
- TO USE CLOTH GUIDE & THUMB SCREW
- TO OIL THE MACHINE
- Fig. 46
- DO NOT OIL THE MOTOR
- If your machine is equipped with a motor, do not oil the motor because the motor shaft revolves in permanently oiled impregnated cast bronze bearings.
- No Lubrication is Required.
- SEi THAT THE PRESSER FOOT (12) is securely in ploce ond fits snug ogoinst the presser bar so thof the needle moy poss through the opening in the foot without any interference.
- UNEVEN STITCHES. May be coused by,
- (1) Presser foot not resting evenly on moteriol.
- (3) Too short a stitch.
- I 2) The stitches may then be easily removed by pulling the lower thread.