SINGER W1640 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

If bobbin runs out of thread while sewing, it is not necessary to completely unthread

machine to re-wind bobbin.

Simply bring thread from needle up through top thread guide in front of machine (Fig.

9). Insert end of thread from inside to outside in one of the holes of empty boddin.

Proceed according to instructions starting in paragraph 2, page 10 section 3 (Winding

Bobbin).

If you wish to wind a bobbin while sewing, here is another method:

Place spool of thread on second spool pin and proceed as shown in illustration on page

10 Section 3 (Winding Bobbin). DO NOT RELEASE SEWING MECHANISM by turning

stop motion knob toward you. In this way, while you continue to sew, bobbin will be

filled.

RE-WINDING BOBBIN WHEN MACHINE IS THREADED

-14-