SINGER W1640 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CHANGING PRESSER FOOT

Raise needle to its highest position by

turning hand wheel toward you. Raise

presser foot by lifting Presser Foot

Lifter located on back of machine.

Loosen

thumb

screw

and

remove

foot.

Place grooved side of selected presser

foot

against

presser

bar.

Tighten

screw securely with screwdriver.

Do not operate machine with presser

foot lowered unless fabric is between

presser foot and fabric feed.

CHANGING NEEDLE

Raise needle to its highest position by

turning

hand

wheel

toward

you.

Loosen

Needle

Clamp

Screw

and

remove needle.

Place new needle so its flat side faces

back. Push up into needle clamp as

far as possible. Tighten screw with a

screwdriver.

Turn hand wheel toward you one. com

plete rotation to be sure needle is

correctly positioned.

Fig 3 B