Stretch bijndstitch, Stretch blindstitch – SINGER W6105 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SJ i i
i Uf t liNÍU
A great variety ol decoralrve stitching can be created by using one or more
rows of a stitch pattern or by combining difïerent stitches - lop stitching,
decorative borders and trims, monograms, appliques and embroidery.
TOP Sin CUING
You can accent lines of a garment with
one or more rows of topslitching along
collars, lapels, yokes, lacing edges,
pockets, cuffs, seams and hems.
•
Use straight stitch tor a more
tailored look, sewing with button
hole twist for added emphasis.
•
Use stretch straiglit stitch for a
heavier row of stitching, even with
regular thread.
•
Use satin stitch for wider row of
stitching, especially for borders.
Or use one of the following stitches,
varying the width for special effects.
STRETCH ZIG-ZAG STITCll
Stretch zig-zag stitch resembles rick-
rack trim. It is reversible, looking the
same on both the right and wrong
sides. (See page 28).
' I
" .Î
STRETCH BIJNDSTITCH
Stretch blindstitch is a very decorative
asymmetrical design, which can be va
ried by moving the stitch width knob.
(See page 28).
29
CREATE-A-STITCH
Machine Setting
Below ate jirst a lew ot the many patterns you can make with the Create-A-Stitch k
hot best results, sew at moderate rate of speed. Vary patterns by varying speed will
which you move lever, or by varying number of stitches made.
At even speed, move lever from left to right.
Tlien allow lever to slide back slowly while
holding it.
jéÊ .ji/É
jj
M
Move lever quickly to halfway point then more
slowly to extreme rigiri, 'flier, allow lever to
slide back slowly to halfway point, then more
quickly to extreme left.
Make patterns as above, then stitch 3 or 4
straight stitches before repeating design.
Use directions given for first design, but move
ever more slowly.
Alternate directions lor first and second designs.
Slide lever to extreme right before starting.
Hold urrtrl pattern is desired length, then quick
ly release lever and stitch 3 or 4 straiglit stitches
before repeating design.
At even speed, move lever slowly from left to
right, 'llien release lever quickly, allowing it to
spring back.
Slide lever to extreme right before starting, then
allow lever to slide back slowly whOe holding it.
nien immediately slide to extreme right again.
Move lever to extreme right and hold for several
slilches, then allow lever to slide back to left.
Move lever slowly from left to right. ITien re
lease lever so it III w spniig back only half way ;
hoki lor several stitches, then allow to spring
hack complete.