SINGER W6105 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

PRESSURE
I ressuie on the presser toot must be
regulated lor different types of fabrics.
Proper pressure allows fabric to feed
smoothly and evenly with no skipped
stitches.
lo adjust pressure, push down outer
ring of pressure regulator until center
button springs up. Oien push center
button down until the suitable amount
ot pressure is obtained.
As a lule, icduce prcssuie vvlien sewing
heavy lahiic or inulli|>k' layers. Iii-
cieuse piesMire when sewing lighter
weiglii labiics. Release piessuie conn
pleiely loi embroidering, and darning,
so labile can be moved in any direc
tion by hand.
The sewing light is located directly
over the needle so as to better illumi
nate the stitching area. Turn the light
on and off by pushing the switch
located on the back ol the machine.
To replace bulb, turn light off and
open lace plate. Unscrew bulb as you
do a conventional light blub. Place
new bulb in socket and screw in place.
D.mi Sew
[-d
or Stitching Ordinary
Fabrics
Darn .Sew
For stitching light
weight fabrics
Darn Sew
i3 I______
r darning embroidering
sewing on bullous
Fabric I'eed up
l-'abric teed half
way down
I'ahric Iced down
FABRIC FEED
Fabric teed or teed dog moves fabric
loiwaitl Ol backward uiidei (lie presser
tool. Ii can be raised.or lowered by
pushing (he SFW-DARN bulions h>
caied on die machine base plate.
For ordinary slraiglil or /ig-zag stiidi-
ing press SFW Inition all (he way
down. I Ills raises tabiic feed lo ils
liighesi
position.
For
liglitweight
tabiics, press SF.W billion down only
half way (line marked on button) to
prevent teed liom marking labric.
Foi daiiiiiig, eiribroidei ing and sewing
on billions, press DARN biiUon all die’
way down lo lower die leed. Flus
allowíj labile (o be moveil freely by
hand.
17
lb