Setting flaps for free-arm sewing – SINGER W710 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Portable case cover is fixed to the base with two latches at each narrow side of the cover, For
opening the case, press the latches out and down to release them from the hooks on the
bottom base of the case.
For closing, hang the latches to the hooks on the bottom base and press them up.
Unless installing machine into cabinet, it is not necessary to remove the bottom base of the
case from machine.
15
16
Sewing Machine and Base
17
SETTING
THE
EXTENSION
FLAPS
FOR
SEWING
ON
FLAT
SEWING
SURFACE
Turn flap release knob counter-clockwise
to release the front flap and clockwise for
the back flap. Pul! the flap brace to out
nnsitinn
SETTING
FLAPS
FOR
FREE-ARM
SEWING
Press the flap brace into the lower arm,
then, press both flaps down until they
click on the stopper latches of flap release
tM tuu*
Note: Free-arm setting of machine is for
simple handling of tubular and
hard-to-reach garment areas. (See
Page 55,1