SINGER W671 User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

bobbin is filled, the latch automaticallr

disengages

and

stops

the

winding

operation. (Fig. 5)

By using the spool-pin on tlte machine

bed vD) spare bobbins can be wound

and

prepared

without

interfering

with

your sewing.

(Fig. 4'i

ARM THREAD

GUIDE

ARM SPOOL

P1N_,

(A)

BOBBIN

WINDER

(Fig. 5)

To thread the Bobbin Case

Hold the bobbin between the thumb and fore

finger of your right hand and pull out two or

three inches of thread.

Holding the bobbin case in your left hand, turn

the open side up and place the threaded bobbin

into it. (Fig. 6)

SPINDLE

(C)

PUSH

BUTTON

(B)

BOBBIN

WINDER

TENSION

BRACKET