Quilting – SINGER W671 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Note : Do not crowd fabric into the scroll, nor leave the scroll only partly filled
with fabric.
Instead of a straight stitch, you can also use a zigzag stitch for this hemming
operation. Be sure, however, to adjust the width of the zigzag stitch so that it is
as wide as the hem itself.
'
Using a very long stitch and tight tensions will produce a SHELL STITCH.
Quilting
(Pig. 28)
the quilter by the thumb screw'. (Fig. 28)
The
quilting
attachment
(Fig. 28') will enable you
to
sew
equi-distant
lines
on
padded
fabrics
without
the
necessity
of
marking
them in advance.
To attach the quilter to the
presser bar of the machine,
raise the presser bar, loosen
the thumb screw and clamp
Adjust the curved hook to the desired distance from the needle and adjust it to
press into the fabric.
When sewing, the hook should follow' the preceeding line f'f stitching.
Zigzag stitch quilting is done the same as straight stitch quilting except that the
zigzag width lever “A” (Fig. 21) should be set for the desired width of the
zigzag stitch.
18