Automatic darner, Built-in sewlight – SINGER W671 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Presser foot for zigzag stitch. (regulari>
Presser foot for straight stitch.
Presser foot for hemming.
Presser foot for button sewing.
Presser foot for buttonhole sewing.
Presser foot for braid sewing.
Automatic Darner
For releasing pressure on the foot, press
down the ring (A) (Fig. 14), which
will allow the darner to spring up to
its
highest
position
and
leave
the
material free from any pressure from
the presser foot.
For sewing thin or light fabrics, press
the top of the darner (B) down lightly
to get the required slight pressure on
the fabric.
(Fig. 14)
For sewing thicker or heavier fabrics, push the top of the darner down further,
in order to get a stronger pressure on the presser foot.
Built-in Sewlight
To
insert
the
electric-bulb,
pull
the
knob (A) (Fig. 15) until the socket is
tilted at an angle enabling you to
screw the bulb in.
(Fig. 15)