Electrical, Tioisis, Attaching sion plate – SINGER W310 User Manual
Page 7: Attaching the extension plate
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ELECTRICAL
TIOISIS
CONNEC-
Insert the plug with the inden^
tations on the underside into
the socket on the right side of
the machine. The plug will
only go in one way. Place the
foot control in such a position
that your foot rests comfort
ably on it. Insert the plug into
a wall outlet, 110^120V.
A/hen not in use, keep the plug
iisconnected from machine.
ATTACHING
SION PLATE
EXTEN-
To change to flat sewing
surface, place extension plate
as follows.
1.
Turn down the extension
plate support legs (A) with
the left hand.
2.
Pull the lock lever (B) and
turn it up to the left.
3.
Tilt the extension plate
down to enter the pin |C)
in the corresponding hole
ID) at the rear side free
arm.
i .
Turn the lever (B) down to
the right to set the pin
into front hole |E).
\|ote:
In case of sewing
tubular areas, detach
the
extension
plate
for free arm sewing.