SINGER W1665 - Manual (Page 42)

40
THE ADJUSTABLE CORDING
AND ZIPPER FOOT
This attachment is used to make and
insert covered cording, and to sew in
zippers. Loosen thumb screw to slide
foot to either right or left of needle.
CORDING. Fold bias strip of
fabric over cord. Loosen thumb screw
and set foot so needle is centered in
needle hole. Machine baste cord in
place (Fig. 86-^87). Fig. 87
To sew covered cord to material, reset adjustable
foot so needle stitches closer to cord, and on edge
of base fabric.
SEWING IN ZIPPER
Loosen thumb screw and slide foot so needle
enters center of needle hole. Guide metal of zipper
along
edge of foot (Fig. 88). Stitching should be
close to zipper to allow easy opening and closing.
Adjust to sew from either right or left side, which­
ever is more convenient.