SINGER W1665 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
10
STRAIGHT STITCHING
For
straight
sewing on fine fabric
or
very soft material, it is advisable to use
the
straight
stitch
presser
foot
and
the
straight
stitch
needle
plate
which
are
included
in
your
accessory
box.
Both
have narrow needle slots.
Changing
the
Foot
and
Plate.
To
change
presser
foot
(19, Fig. 1) loosen thumb screw and remove zigzag foot.
Replace
with
hinged
straight
foot
and
tighten
screw
securely. Fig. 14
To
change
needle
plate
(16,
Fig.l)
remove
screw
and
lift
off
with
cover
plate
attached.
Hold needle plate with left hand and cover plate with the right. (Fig. 13)
Press
upper
corner
of
cover
plate
(right
side
up)
down
slightly
and
slip
pin
from
groove
in needle plate. Avoid using too much pressure. When the pm is released the wo p
will separate.
Attach cover plate to straight stitch plate by reversing the above procedure.
Slip pin on lower side of cover plate into groove on needle plate. Insert tongue into square
openmg and slide upper pin into position. Put plates on machine and fasten securely with
needle plate screw.