SINGER W1665 - Manual (Page 13)

11
Be sure to set the stitch width at 0, or the
needle will break in striking the foot or plate.
1. Set left hand stitch width lock 13 as far
left as possible.
2. Move right hand stitch width lock 13 as
far left as possible to lock zigzag stitch
width
control lever 14 in straight stitch
position. (To move locks push in slightly.)
3. Put drop feed knob 15 at high setting,
4. Set decorative stitch dial 4 at M position.
5. Set stitch length control beyond Number
1 (adjust stitch length to suit material
being sewn.)
SETTING THE STITCH LENGTH
The length of the stitch is regulated by the
knob 9 shown in Fig. 15. Near 0 is the shortest
and 6 the longest. Turn the knob to the left to
lengthen and to the right to shorten the stitch.
STITCH LENGTH CHART (Approximate)
Figures on dial 0 1 2 3 4 5 6
Number o f j^o Feeding 36 20 12 9 7 6
stitches per inch ______________________ _
SEWING IN REVERSE
When you wish to sew in reverse to tie the
threads at the beginning or the end of a seam,
press in the reverse button 10 as far as it will
go. The machine will sew backward as long as
the button is held in.
Fig. 15