SINGER W1665 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
26
CARE AND MAINTENANCE OF YOUR MACHINE
CLEANING AND OILING THE SHUTTLE
The stitch forming mechanism occasionlly becomes clogged with
^
This
will
interfere
with
the
efficient
operation
of
the
machine.
Cleaning
should
be
done
wit
a small brush, never with a sharp or pointed tool. To remove the stitch forming mechanism,
hanTwheel until the needle reaches its highest position. The mechanism will
assume the position illustrated in Fig. 57. Tilt head back on its hinges.
2
Remove bobbin case E.
3.
Turn the two shuttle race cover clamps C outward and remove the shuttle race cover
B and shuttle A.
j *.
4.
Clean the shuttle race, shuttle and shuttle race cover by removing all threads, lint, etc.
5.
Apply a drop of oil with finger tip to outer edge of shuttle.
E BOBBIN
gasp
:
□ ^SHUTTLE DRIVI
NOTCH
SHUTTLE BODY
„„
B SHUTTLE RACE
COVER
A-
.
%
DIN'
COVER CI.AMI’S
Fig. 57
Fig. 58