Canon A1100 IS - Manual (Page 86)

86
You can select from among three image quality settings.
Select the image quality.
● After pressing the m button, press the
op buttons to select .
Select an option.
● Press the qr buttons to select an option,
then press the m button.
X The setting will display on the screen.
Image Quality Table
Estimated Shooting Time
Changing the Image Quality
Image Quality
(Recording Pixels/Frame Rate)
Content
640 x 480 pixels, 30 frames/sec. For shooting standard quality movies.
640 x 480 pixels, 30 frames/sec. LP
The image quality will be lower than with ,
but you can record twice the length.
320 x 240 pixels, 30 frames/sec.
Since the number of the recording pixels is
smaller, the image quality will be lower than
with
, but you can record three times the
length.
Image Quality
(Frame Rate)
Shooting Time
128 MB (Supplied) 2 GB 8 GB
1 min. 4 sec. 16 min. 47 sec. 1 hr. 7 min. 6 sec.
2 min. 7 sec. 33 min. 2 sec. 2 hrs. 12 min. 3 sec.
3 min. 1 sec. 46 min. 33 sec. 3 hrs. 6 min. 4 sec.
• Based on Canon’s testing standards.
• Recording will automatically stop when either the clip file size reaches 4 GB or the
recording time reaches approximately 1 hour.
• Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 4 or higher memory cards are recommended.