Adjusting the brightness (exposure compensation), Continuous shooting, B adjusting the brightness – Canon A1100 IS User Manual
Page 68: Exposure compensation) w continuous shooting, Sation), P. 68), Correct the exposure, Select the drive mode, Select w, Shoot
68
You can adjust the standard exposure set by the camera in 1/3-stop
increments in the range of -2 to +2.
Correct the exposure.
●
After pressing the
o button, press the qr
buttons to correct the exposure. Then
press the
m button.
X
The exposure compensation amount will
display on the screen.
You can shoot continuously at about 1.1 images/second.
Select the drive mode.
●
After pressing the
m button, press the
op buttons to select
.
Select
W.
●
Press the
qr buttons to select W, then
press the
m button.
X
Once set,
W will appear.
Shoot.
X
As long as you hold the shutter button
down, the camera will shoot successive
images.
b Adjusting the Brightness (Exposure
Compensation)
W Continuous Shooting
•
Cannot be used with the self-timer
•
For continuous shooting, the focus and exposure are locked when the
shutter button is pressed halfway.
•
As the number of images increases, the shooting intervals may take
longer.
•
If the flash fires, shooting intervals may take longer.