The set of hemmers, Zzln – SINGER W134 User Manual

Page 36

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

THE SET OF HEMMERS

Before attaching any of the hemmers, be sure bob

bin thread is pulled up. Then, with hemmer in place,

hold top thread loosely and turn handwheel one full

turn toward you, making a loop under hemmer. Grasp

bobbin thread with both hands and slip horizontally

under hemmer toward back. Bobbin thread will catch

loop and carry upper thread to back of hemmer.

Fold material in

inch for two inches along edge,

— - - -

°ZZln

with point of noodU. Pull on threads gently as yon start stitching.

Fig. 41

darning

spring

HOW TO ATTACH

Remove presser foot, unthread needle, place darner

spring on needle and slip hook up over needle clamp.

Fig. 42