SINGER W134 User Manual

Page 24

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

l.c. the belt on yout machine, the hand wheel

If it should eve, become necessary to replace th

must first be loosened and moved out.

r. «

.....,, .... .»•

1. Remove clutch nut

(A) m

„„til it can

lifted off.

Fig. 24. Turn nut

the washer, (C, Fig- 25), whroh fils

2. Before moving the hand wee

under the clutch nu .

enough to

make

Pull hand wheel away from the machine carefully, Frg. 26,

^grooved section which

holds the belt

accessrble.

cxfor T3ullev on the end of motor.

4. Slide old belt over hand wheel and

K U into arooved section and over motor pu ey.

5 Slide new belt into groove-a

e. Push hand wheel bach

ggiuting toward the clutch nut.

If washer

(C)

has fallen off, replace

e, Beplace nut and

.„fng mechanism. 1. the

After doing thrs, turn ecu

uu .

needle still moves up and down

Give the washer a half tarn and replace the .