Setting the needle – SINGER W311 BBS User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Correct winding Incorrect winding

In order to ensure smooth rotation of the bobbin within its

case, make sure that the thread is wound evenly on the bobbin,

otherwise it may cause thread to break, irregular tension, or

fail to produce neat stitches.

ADJUSTING TO WIND ON THE BOBBIN

SETTING THE NEEDLE

Turn the balance wheel toward you until the needle bar rea

ches its highest position.

Loosen the needle clamp screw.

Insert the needle with the flat side toward the balance wheel

and push the needle 'up into the needle clamp until it hits the

stop.

Tighten the needle clamp securely.