Regulating pressure on material – SINGER W311 BBS User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

This mechanism drops the feed dog under the needle pi

when the material is required to be moved freely by hand .

embroidering and darning.

When the left button is pushed completely down (mark

DOWN.), it enables the material to be moved freely under :

presser foot, which is convenient for embroidery, darning, e

For sewing very light material, push the center button cc

pletely down (marked SILK).

For ordinary sewing, push the right button completely do'

(marked UP), when the three buttons are always up and evc

REGULATING PRESSURE ON MATERIAL

To increase pressure for heavy materials, press (A) downwa

and to release pressure for light materials, darning, etc., press)

down when (A) will automatically release the pressure.

When darning, lower the presser bar lever and yon are rea

to darn or embroider.

“Note:—When reverting to normal sewing, do not forget

press “A” into position to give the required pressure on :

presser foot, otherwise the machine will not feed properly.

ADJUSTING THE DROP FEED